Subject: Re: hard drive for Laser
Path: lobby!newstf02.news.aol.com!audrey04.news.aol.com!not-for-mail
From: supertimer@aol.com (Supertimer)
Newsgroups: comp.sys.apple2
Lines: 21
NNTP-Posting-Host: ladder07.news.aol.com
X-Admin: news@aol.com
Date: 20 Oct 1999 04:32:22 GMT
References: <19991019223236.17328.00000186@ng-fc1.aol.com>
Organization: AOL http://www.aol.com
Message-ID: <19991020003222.26777.00000182@ng-fz1.aol.com>



obsbedia2@aol.com (Obsbedia2) wrote:

>	Why not consider the best of both worlds, and more memory to boot!  
>
>	Mount the Focus Drive and card on the bottom of the computer.  Yes, the
>bottom.  You can run your cable inside or outside of the computer from the
>expansion slot.  The card is not very thick, so the computer would only sit up
>a little higher if you lay it flat.  If you use the handle to prop up the
>computer for better ventilation, then you should be able to position it so
that
>it's addition does not change the height of the computer at all.
>
>
>             ________________________
>           |                        |  <== Laser EX/2
>Cable ==> r=|________________________|
>          !--\--======######        /   <== Focus Card 
>              ~~~~~~~~~~~~~~~~~~~~~~      in Protective Case

Hey, that's a great idea!  I agree, this method is much better than
trying to extend the case from the side.